4. Virtual Appliance Initial Configuration
Once the PxM Virtual Appliance has been successfully setup and configured, you will need to log on using the PxM Client and upload a valid licence to get started.
Make sure the PxM Virtual Appliance is switched on and make a note of the https address displayed on the Console window.
Depending on the operating system you are using on your workstation, use one of the following PxM Client installation guides to install your PxM Client.
Open the PxM Client and login:
- Address: <HTTPS PxM IP Address>
- Username: superadmin
- Password: <Primary superadmin password, set during the setup and configuration process>
You may be required to confirm the PxM Virtual Appliance Host key fingerprint is correct before continuing, which can be found on the PxM Client download page.
Once successfully logged into the client you will be presented with the PxM Client interface, double-click Browser (HTTP) under Osirium Server.
The Web Management Interface will open in a browser window. You will be prompted to upload a valid PxM licence before you can start using the PxM Platform. Click Choose File and select the licence file provided by Osirium.
Click Acknowledge within the Action notifications window. Your browser will now be refreshed and you are ready to start.
The Welcome to the PxM Platform page provides a quick guide to the steps required to setup and configure device access through the PxM Platform.