Skip to content

Installing the PAM Client

This section is intended for PAM users who want to install the PAM Client and covers:

Before you start

Make sure you have your logon details from your Osirium PAM SuperAdmin:

  • Osirium PAM Server Address.
  • Username.
  • Password.

Installing

To download and install the PAM client:

  1. Open a web browser window and enter the following: https://(Osirium_PAM_Server_Address)/downloads.

  2. On the Osirium PAM Client Download page, click the Download for Windows button.

  3. Within the Client Download window you will also find:

    • Checksum: used to verify the correct file has been downloaded.

    • Host Key Fingerprint: used to verify you are connecting to the correct Osirium PAM server address during your first login to the server.

  4. When the download is complete, double click the executable to start the installation.

    Setup wizard

    The PAM Client is installed into the following folder: C:\Users\username\AppData\Local\Osirium\. The following folders and files can be found here:

    • PAM Client folder contains the:
      - Application files: including the Osirium.exe, Uninstall.exe and debug.log files.
      - Resources folder: contains the default applications that will be used to launch your device tools.

    • Logs folder will store the Trace.log files when created. These log files will keep a log of your connections and authentication attempts.

  5. When the installation has finished, an Osirium PAM Client desktop shortcut will be added and the Osirium PAM login window be presented.

Logging on

  1. Click on the Osirium PAM Client shortcut on your desktop.

    PAM Client login

  2. Enter your login details:

    Field name Description
    Hostname Enter the address (IP Address or hostname) of the Osirium PAM.
    Username Enter your PAM username.
  3. Click NEXT.

  4. Depending on your authentication method you will either:

    • Enter a password followed by a token (if required).
    • Or if you are using SAML then you can use the USE SINGLE SIGN-ON (SSO) button.

    Password and token SAML

    Note

    If you are using a Token code then following information maybe be helpful:
    RADIUS token code authentication
    If you are using RADIUS authentication that requires you to enter a RADIUS code which is received via SMS or email, then you will be prompted with a secondary Osirium PAM window in which to enter your code. Enter the code and click SEND.

    TOTP (time-based one time password) token code authentication
    If you are using TOTP authentication, then you will be prompted with a secondary Configure multi-factor authentication window and will be required to complete the verification before continuing. For more details see
    - Local username and password then TOTP
    - Active Directory username and password then TOTP

  5. Click LOG IN.

    Note

    If you are using the PAM Client for the first time, then you will be asked to verify the PAM Server fingerprint which can be found on the PAM Server download page [https://PAM-Server-Address/download]. Once verified, click ACCEPT.

  6. When successfully authenticated you will be presented with the PAM Client interface.

    PAM Client Interface

Settings OPTIONAL

There are optional settings that can be configured to customise your PAM Client.

The Settings window can be accessed by clicking on the icon located in the bottom right-hand corner.

Within the Settings window you can configure:

  • Your download file location.

  • The launch tools you want to use.

Client settings

Download file location

You can configure your download settings to either prompt you to select a download location or you can set a default location for where all files you download will be saved to.

Select device tools

Default launch tools can be configured and you can select your preference from the compatible tools listed.

During the PAM Client installation, any supported tools that are installed on your workstation will be added to the list of available compatible tools. If the executable of the selected tool is not found then you can browse to find the location or you may need to install the tool first if that is the one you want to use.

To configure a launch tool option:

  1. Within the interface, click on the icon located in the bottom right-hand corner.

  2. Within the Settings window select a tool listed in the left-hand menu.

  3. Then on the right-hand side, use the drop-down list to select the tool you want to launch your device connection with.

  4. If an executable path has not been found then browse and select the location of the executable on your workstation.

  5. Click APPLY to save your selection.

  6. Click CLOSE when you have finished.

The below table lists the tools that are included in the PAM Client by default:

Tool Default tools
Browser Built-in browser tool (will default to Chrome when installed)
Command Line Built-in browser tool
KiTTy
Remote Desktop Built-in browser tool
Osirium Remote Desktop (supports dynamic desktop sizing)
Remote App Built-in browser tool
Remote Desktop (Window's default RDP client)
Secure File Transfer Built-in browser tool
WinSCP

Pinning the PAM Client

When you log on to PAM you will be asked to enter a hostname. The hostname of the PAM Server that you will be using can be pinned through the registry. When the hostname is pinned, the hostname field will no longer be visible in the login window.

Hostname field visible Hostname field invisible

To pin the hostname:

  1. Open the Registry Editor on your workstation.

  2. Within the Registry Editor window, navigate to HKEY_LOCAL_MACHINE\Software.

  3. Within the Software key create a a new key called Osirium.

  4. Within the Osirium key create a new key called PAMClient.

    Hostname field invisible

  5. Click on the PAMClient key, in the right-hand pane, right-click and select New > String Value. Name it PAMHost.

    New string value

  6. Right-click the PAMHost entry and select Modify from the menu.

  7. Within the Edit String window, enter the PAM hostname into the Value data field.

    Set hostname

  8. Click OK. The PAM Client hostname is now set.

  9. Close the Registry Editor window.

Note

To update or remove the hostname, edit the PAMHost string data value.

Upgrading

When the Osirium PAM system has been upgraded, the first time you logon to the PAM Client, you will be prompted to upgrade.

To upgrade:

  1. Open the Osirium PAM Client.

    PAM Client login

  2. Enter your login details:

    Field name Description
    Hostname Enter the address (IP Address or hostname) of the Osirium PAM.
    Username Enter your PAM username.
  3. Click NEXT.

  4. Depending on your authentication method you will either:

    • Enter a password followed by a token (if required).
    • Or if you are using SAML then you can use the USE SINGLE SIGN-ON (SSO) button.

    Password and token SAML

    Note

    If you are using a Token code then following information maybe be helpful:
    RADIUS token code authentication
    If you are using RADIUS authentication that requires you to enter a RADIUS code which is received via SMS or email, then you will be prompted with a secondary Osirium PAM window in which to enter your code. Enter the code and click SEND.

    TOTP (time-based one time password) token code authentication
    If you are using TOTP authentication, then you will be prompted with a secondary Configure multi-factor authentication window and will be required to complete the verification before continuing. For more details see
    - Local username and password then TOTP
    - Active Directory username and password then TOTP

  5. Click LOG IN.

  6. You will be prompted with the Software Upgrade window, click UPGRADE. You will see a download progress.

    Software Update

    Note

    If you click CLOSE the Software Upgrade window will close and you will be taken back to the PAM Client login window. You won't be able to logon to the Osirum PAM until you have upgraded your PAM Client.

  7. When the download is ready you will be prompted to continue with the upgrade, click RESTART. The PAM Client will close during the upgrade and reopen once it has completed.

    Software Update Info