IOS Telnet - No Username

Vendor: Cisco

Device type: Network Switch or Router

Supported device versions: 12 - 15

Release notes for this template:

• 2015-10-15 - Does not audit accounts from the device.
• 2015-10-15 - Supports telnet devices that do not prompt for a username.
• 2012-10-10 - Web single sign-on is unavailable.
• 2012-10-10 - Does not support the enable and disable of accounts. Therefore, accounts for this device can not be locked/unlocked through the Osirium Web Management interface.

Other devices of type Network Switch or Router:

ProCurve 2600 Series Telnet (H.10.50)

Procurve E8206 SSH ((k/w).15.x)

ProCurve 2600 Series SSH (H.10.50)

Procurve Y.11.x SSH (Y.11.x)

ProCurve 2910 SSH ((k/w).15.x)

JunOS (10.3)

FastIron IronWare OS (7)

Summit X450a telnet (15.1.1.6)

Summit X450a SSH (15.1.1.6)

IOS SSH - Local Accounts (12.1 - 15.x)

IOS SSH - Active Directory via TACACS (12.1 - 15.x)

NX-OS - Local Accounts (4.x - 7.x)

IOS Telnet (12 - 15)

IOS SSH - Static vault (12.1 - 15.x)

Nortel Ethernet Routing Switch 8600 Series SSH (4)

Nortel Ethernet Routing Switch 8600 Series Telnet (4)

S Series Switch (9.x)

IronWare OS (4.0 - 7.1)

Other devices by Cisco:

ASA (Adaptive Security Appliance) - Active Directory via TACACS (8.x - 9.x)

IOS SSH - Local Accounts (12.1 - 15.x)

ASA (Adaptive Security Appliance) - Local Accounts (8.x - 9.x)

IOS SSH - Active Directory via TACACS (12.1 - 15.x)

NX-OS - Local Accounts (4.x - 7.x)

IOS Telnet (12 - 15)

IOS SSH - Static vault (12.1 - 15.x)

ASA (Adaptive Security Appliance) - Static vault (8.x - 9.x)

Last edited: 2019-01-07 13:30:22