Skip to content

Upgrading the PAM UI using VMware vSphere


Before starting your upgrade make sure that all prerequisites have been met.

The following steps walk you through upgrading the PAM UI within your VMWare vSphere infrastructure:

  1. Within VMware vSphere upload the PAM UI ISO file into the same storage location as the other files belonging to the virtual appliance you are upgrading. Ensure you retain the ISO file version number in the filename for future reference and to easily identify what version is running.

  2. Right-click the appliance to be upgraded and select Power -> Power Off.
    Power off

  3. Wait for the PAM UI to shut down, then right-click the appliance and select Edit Settings.
    Edit Settings

  4. Toggle CD/DVD drive 1, look for CD/DVD Media and click the BROWSE... button. Select the new PAM UI ISO from the datastore.
    Edit Settings Menu

  5. Right-click the virtual appliance and select Power -> Power On. The PAM UI will now boot and apply the updates.

    Wait while the configuration has been applied and the virtual appliance is rebooted. The upgrade is now complete and ready for use.